Hanjia Automation Technology (Suzhou) Co., Ltd. Hanjia Automation Technology (Suzhou) Co., Ltd.Industrial Networking · Machine Safety · Edge Control 中文 | EN
Home / Products / Industrial Networking (Kyland)

Kyland · Industrial Networking Products

Industrial Ethernet switches, media converters, edge gateways, serial servers and industrial wireless — from in-cabinet access layer to rack-mounted core, covering power, rail, oil and gas, smart manufacturing and renewable energy. Hanjia Automation Technology (Suzhou) Co., Ltd. is an authorized distributor and service partner.

Select first

Narrow down by requirement

Narrow by application, series and requirement and the matching models and parameters are listed immediately below. Series details follow further down. For a row-by-row check of all 51 models, use the full model table.

Category
Series
Requirement
Matching 51 modelsTip: filters combine; click “All” in a group to clear it
CategorySeriesModelPorts / functionsPowerOperating temp.Protection / mountingNotes
Managed switchesSICOM3000ASICOM3000A-Ports-PS1-PS2二层网管卡轨式；端口可选 6T / 8T / 2SFP8T / 2GX8T / 4SFP8T / 4GX8T / 8GE / 2GX8GE / 4GX8GE / 16T / 16GE / 2GX16T / 2GX16GE / 4SFP16T / 4GX16T / 4GX16GE / 8SFP8T / 8GX8T / 8GX8GE / 12GX8GEL2-L2：24-48VDC（18-72VDC）冗余；L5-L5：12-24VDC（9-36VDC）冗余；HV：100-240VAC / 110-220VDC 单路-40℃ ～ +75℃IP40 及以上 / DIN 卡轨式或壁挂式DT-Ring 自愈 <50ms；DRP/DHP/MRP 自愈 <20ms；IEEE1588 PTPv2（±100ns）；背板带宽 40Gbps
Managed switchesSICOM3000ASICOM3000A-Ports-PS1-PS2-PN同上，并支持 PROFINET（一致性等级 B、PROFINET IO 诊断、GSD 文件、STEP7 组态诊断）同上-40℃ ～ +75℃IP40 及以上 / DIN 卡轨式或壁挂式另支持 EtherNet/IP、Modbus/TCP；EMC 达 EN 50121-4 / IEC61850-3 / IEEE1613；可选 ATEX/IECEx Zone 2
Managed switchesSICOM3024PSICOM3024P-4GX24GE-HV-HV28G 机架式；4×千兆光电复用（SFP）+ 24×千兆电口100-240VAC, 50/60Hz / 110-220VDC / 24-48VDC，±20%，2 路-40℃ ～ +75℃IP40 / 19 英寸 1U 机架式交换容量 56Gbps；包转发率 83.3Mpps；MAC 16K；ACL 512；<45W
Managed switchesSICOM3024PSICOM3024P-8G12GX8GE-HV-HV28G 机架式；8×千兆光电复用 + 12×千兆光口 + 8×千兆电口100-240VAC, 50/60Hz / 110-220VDC / 24-48VDC，±20%，2 路-40℃ ～ +75℃IP40 / 19 英寸 1U 机架式支持基于硬件的 PTP；PTPv2 / NTP
Managed switchesSICOM3024PSICOM3024P-8G8GX4GBS8GE-HV-HV28G 机架式；8×千兆光电复用 + 8×千兆光口 + 4×千兆单模 Bypass 光口 + 8×千兆电口100-240VAC, 50/60Hz / 110-220VDC / 24-48VDC，±20%，2 路-40℃ ～ +75℃IP40 / 19 英寸 1U 机架式含 Bypass 旁路功能（断电直通）
Managed switchesDGICOM3000DGICOM3000-2GX4GE-LV-LV6 端口二层网管卡轨式；2×千兆 SFP（100Base-X / 1000Base-X / 10-100-1000Base-T(X) 可选）+ 4×千兆电口12-48VDC，冗余输入-30℃ ～ +70℃IP40 / DIN 卡轨式ERPS/STP/RSTP/MSTP；IGMP Snooping；SNMPv1/v2c/v3 + Kyvision；<10W；1.0kg
Unmanaged switchesAmber5Amber5-5T-LV-LV5 端口非网管卡轨式；5×10/100Base-T(X) RJ45 电口12-48VDC，冗余输入-30℃ ～ +70℃IP40 / DIN 卡轨式即插即用；MAC 1K；包转发 0.75Mpps；<4W；0.3kg
Unmanaged switchesAmber5G / 8GAmber5G-5GE-L17-L175 端口全千兆非网管卡轨式；5×10/100/1000Base-T(X) RJ45 电口12-48VDC，冗余输入-25℃ ～ +75℃IP40 / DIN 卡轨式编码 302320001；拨码开关控制 QoS / 流控 / 风暴抑制 / 强制百兆；MAC 2K；<5W
Unmanaged switchesAmber5G / 8GAmber8G-8GE-L17-L178 端口全千兆非网管卡轨式；8×10/100/1000Base-T(X) RJ45 电口12-48VDC，冗余输入-25℃ ～ +75℃IP40 / DIN 卡轨式编码 302320002；MAC 4K；包转发 11.9Mpps；超长帧 9216 bytes；<5W
Unmanaged switchesOpal8Opal8-2S6T-SC40-LV-LV8 端口二层非网管卡轨式；2×百兆单模光口（SC，1310nm，40km）+ 6×百兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式拨码开关控制广播风暴抑制；<4.6W；0.3kg
Unmanaged switchesOpal8Opal8-2M6T-SC05-LV-LV8 端口二层非网管卡轨式；2×百兆多模光口（SC，1310nm，5km）+ 6×百兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式拨码开关控制广播风暴抑制；<4.6W
Unmanaged switchesOpal8Opal8-1S7T-SC40-LV-LV8 端口二层非网管卡轨式；1×百兆单模光口（SC，1310nm，40km）+ 7×百兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式拨码开关控制广播风暴抑制；<4.6W
Unmanaged switchesOpal8Opal8-1M7T-SC05-LV-LV8 端口二层非网管卡轨式；1×百兆多模光口（SC，1310nm，5km）+ 7×百兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式拨码开关控制广播风暴抑制；<4.6W
Media convertersKOM300FKOM300F-1M2T-SC05-LV-LV3 端口卡轨式光纤收发器；1×百兆多模双纤光口（SC05）+ 2×百兆电口12-48VDC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式满载功耗低至 2.2W；MAC 2K；MTBF 478852h；保修 5 年
Media convertersKOM300FKOM300F-1S2T-SC40-LV-LV3 端口卡轨式光纤收发器；1×百兆单模双纤光口（SC40）+ 2×百兆电口12-48VDC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式满载功耗低至 2.2W；支持 IEC 62368-1 / EN 62368-1
Media convertersKOM300FKOM300F-1M2T-SC05-HV3 端口卡轨式光纤收发器；1×百兆多模双纤光口（SC05）+ 2×百兆电口100-240VAC, 50/60Hz；110-220VDC（85-264VAC / 77-300VDC），单路输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式HV 电源版本；<2W
Media convertersKOM300FKOM300F-1S2T-SC40-HV3 端口卡轨式光纤收发器；1×百兆单模双纤光口（SC40）+ 2×百兆电口100-240VAC, 50/60Hz；110-220VDC（85-264VAC / 77-300VDC），单路输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式HV 电源版本；<2W
Edge gatewaysKGW3000ALKGW3000AL-4G-W-L5经济型边缘网关；2×百兆电口 + 2×RS485 + 1×RS232；支持 4G 蜂窝通信与 2.4G WiFi 接入9-36VDC，3 芯插拔式端子-20℃ ～ +70℃IP40 / DIN 卡轨式双核 A7 1.2GHz / 128MB 内存 / 256MB NAND；<5W；MTBF >300000h；保修 5 年
Edge gatewaysKGW3000ALKGW3000AL-4G-L5经济型边缘网关；2×百兆电口 + 2×RS485 + 1×RS232；支持 4G 蜂窝通信（无 WiFi）9-36VDC，3 芯插拔式端子-20℃ ～ +70℃IP40 / DIN 卡轨式支持 Modbus RTU/TCP、OPC UA、DNP3.0、DL/T645、IEC-60870-101/103/104、S7、MQTT
Edge gatewaysKGW3000ALKGW3000AL-4G-W-IO-L5经济型边缘网关；2×百兆电口 + 2×RS485 + 1×RS232 + 4 路 DI + 4 路 DO；支持 4G 与 2.4G WiFi9-36VDC，3 芯插拔式端子-20℃ ～ +70℃IP40 / DIN 卡轨式支持 NAT（16 条转发规则）、OpenVPN、AES/DES/3DES；可接入东土设备云平台
Serial serversKPS3204AKPS3204A-2T4D-232/485/422-L17-L17-KD全国产化三合一串口服务器；2×百兆电口 + 4 路 RS232/RS485/RS422（DB9 Male，2kV 隔离）12-48VDC，冗余输入-40℃ ～ +75℃IP40 / 壁挂或导轨国产 4 核 A53 1.5GHz / 国产 2GB 内存 / 16GB eMMC；10W；净重 0.7kg；毛重 0.9kg；保修 5 年
Serial serversKPS3408AKPS3408A-4T8D-232/485/422-L17-L17-KD全国产化三合一串口服务器；4×百兆电口 + 8 路 RS232/RS485/RS422（DB9 Male，2kV 隔离）12-48VDC，冗余输入-40℃ ～ +75℃IP40 / 壁挂或导轨国产 4 核 A53 1.5GHz / 国产 2GB 内存 / 16GB eMMC；15W；净重 1.0kg；毛重 1.2kg；MTBF >300000h
Serial serversKPS3408AKPS3408A-2SFP2T8D-232/485/422-L17-L17-KD全国产化三合一串口服务器；2×百兆 SFP 光口 + 2×百兆电口 + 8 路 RS232/RS485/RS42212-48VDC，冗余输入-40℃ ～ +75℃IP40 / 壁挂或导轨支持 Modbus RTU-TCP 转换；TCP Server / Client / UDP 透明传输
Industrial wirelessKyAir100EKyAir100E-4GE-L17双 5G 频率 AGV 专用无线终端；4×千兆 LAN 口 + 1×千兆 WAN 口（集成 5 口交换机）+ 1×RS485 凤凰端子12~48VDC，单路输入-20℃ ～ +55℃IP41 / 壁挂（另支持卡轨、支架）802.11ac 2x2；最大无线速率 867Mbps（每频段）；双 5G 频段同时搜索连接；天线增益 5dBi 全向 360°；漫游增强 + 自动选频；140×90×32mm
Industrial wirelessKyAir810BAKyAir810BA-2GE-L6WiFi6 本安型无线接入板卡；2×千兆电口 + 2×SMA 天线口（2.4G 与 5G 合路）12-24VDC，单路本安电源输入-40℃ ～ +70℃板卡（125×88.6×20mm） / 板卡内嵌802.11ax 双频；最高接入速率 2975Mbps（2.4G 575M + 5G 2400M）；最大发射功率 27dBm（可调，步进 1dBm）；整机功耗 ≤14W@12VDC；支持胖 AP / 瘦 AP / Client / WDS；802.11k/v/r 漫游；MTBF >250000H
Accessories安装与防护DT-BGAZ-01壁挂安装板——— / 配件适用于 KOM300F、Opal8 等卡轨式设备
Accessories安装与防护DT-BGAZ-02壁挂安装板——— / 配件适用于 SICOM3000A 系列
Accessories安装与防护DT-FCZ-RJ45-01单口 RJ45 防尘罩——— / 配件适用于 Amber5、KOM300F、Opal8、SICOM3000A 等
Accessories工具与模块KyACB-USB-RJ45自动配置备份和恢复工具——— / 配件配合 SICOM3000A 自动配置备份/恢复使用
Accessories工具与模块SFP 模块工业级 SFP 光模块——— / 配件按《工业级 SFP 模块选购表》选配
Managed switchesSICOM3000ASICOM3000A-4GX8GE-LV-LV二层网管卡轨式；4×100Base-X/1000Base-X/10-100-1000Base-T(X) SFP + 8×千兆电口12-48VDC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式DT-Ring 自愈 <50ms；DRP/DHP <20ms；交换容量 24Gbps；包转发 18Mpps；<13W；1.5Kg；MTBF 1317486h；CE/FCC、EN 50121-4（轨交）
Managed switchesSICOM3000ASICOM3000A-4GX8GE-HV同上，HV 电源版本100-240VAC 50/60Hz；110-220VDC（85-264VAC/77-300VDC），单路输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式尺寸 88×135×137mm；重量 1.5Kg；尺寸与 LV 版不同，柜内空间需单独核算
Managed switchesSICOM3000ASICOM3000A-4GX16GE-LV-LV二层网管卡轨式；4×(100Base-X/1000Base-X/10-100-1000Base-T(X)) SFP + 16×千兆电口12-48VDC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式交换容量 40Gbps；包转发 29.8Mpps；<19.5W；1.0Kg；MTBF 1097144h；尺寸 87.1×134×106mm
Managed switchesSICOM3000ASICOM3000A-4GX16GE-HV同上，HV 电源版本100-240VAC 50/60Hz；110-220VDC（85-264VAC/77-300VDC），单路输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式尺寸 102×135×137mm；重量 1.9Kg
Unmanaged switchesOpal20Opal20-2GX16T-LV-LV16+2G 端口非网管卡轨式；2×(100Base-X/1000Base-X) SFP + 16×百兆电口12-48VDC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式MAC 8K；包转发 5.7Mpps；<7W；0.5Kg；44×162×115mm；拨码控制广播风暴抑制与 QoS；MTBF 825432h；保修 5 年
Unmanaged switchesOpal10GOpal10G-2GX8GE-LV-LV10G 端口全千兆非网管卡轨式；2×1000Base-X SFP + 8×千兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式内置隔离电源；MAC 4K；包转发 14.9Mpps；6.9W；0.5Kg；53.6×135×108mm；超长帧 9KB；UL61010 Class I Div 2；MTBF 6363643h
Unmanaged switchesOpal8GOpal8G-8GE-LV-LV8G 端口全千兆非网管卡轨式；8×千兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式内置隔离电源；MAC 4K；包转发 11.9Mpps；5W；0.4Kg；31×147×94mm；超长帧 9KB；UL61010 Class I Div 2；MTBF 7862765h
Unmanaged switchesOpal8GOpal8G-8GE-LV-LV-W同上，-W 紧凑形态（IP30）12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式尺寸 45.6×100.5×101mm；重量 0.3Kg；MTBF 6856926h
Unmanaged switchesOpal5Opal5-1SFP4T-LV-LV5 端口非网管卡轨式；1×100Base-X SFP + 4×百兆电口12-48VDC / 18-30VAC，冗余输入-40℃ ～ +75℃IP40 / DIN 卡轨式或壁挂式内置隔离电源；MAC 2K；包转发 0.75Mpps；2.4W；0.3Kg；31×114.5×94mm；UL61010 Class I Div 2；MTBF 8502760h
Managed switchesSICOM2024MSICOM2024M-4SFP24T-L2-L224T+4G 二层网管机架式；4×1000Base-X SFP + 24×10/100Base-T(X) RJ45 电口24-48VDC（18-72VDC），冗余电源，5 芯 5.08mm 插入式端子-40℃ ～ +85℃IP40 / 19 英寸 1U 机架式（支持前面板 / 后面板安装）DRP/DHP 自愈 <20ms；DT-Ring/DT-Ring+/DT-VLAN 自愈 <50ms；STP/RSTP/MSTP；MAC 8K；VLAN 4K；组播组数 511；包缓冲区 4.1Mbit；包转发 9.5Mpps；交换延迟 <10μs；<13W；<3Kg；482.6×44×200mm；自然冷却无风扇；MTBF 318296h；保修 5 年
Managed switchesSICOM2024MSICOM2024M-4SFP24T-HV-HV同上，HV 电源版本100-240VAC 50/60Hz；110-220VDC（85-264VAC/77-300VDC），冗余电源-40℃ ～ +85℃IP40 / 19 英寸 1U 机架式（支持前面板 / 后面板安装）端口配置、交换属性、尺寸重量与 L2 版一致；EMI：FCC CFR47 Part 15、EN55022/CISPR22 Class A
Unmanaged switchesOpal5Opal5-5T-LV-LV全电口 5 端口非网管卡轨式；5×10/100Base-T(X) RJ45 电口12-48VDC，冗余输入，4 芯 5.08mm 插入式端子-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式MAC 2K；包缓冲区 1Mbit；包转发 0.75Mpps；交换延迟 <10μs；2.0W；0.2Kg；29.6×114.5×68mm；拨码开关控制广播风暴抑制与 QoS；CE、FCC；MTBF 5777888h；保修 5 年
Unmanaged switchesOpal8Opal8-8T-LV-LV全电口 8 端口非网管卡轨式；8×10/100Base-T(X) RJ45 电口12-48VDC，冗余输入，4 芯 5.08mm 插入式端子-40℃ ～ +75℃IP30 / DIN 卡轨式或壁挂式MAC 2K；包缓冲区 1Mbit；包转发 1.2Mpps；交换延迟 <10μs；2.2W；0.3Kg；29.6×147×95mm；拨码开关控制广播风暴抑制与 QoS；CE、FCC；MTBF 6106558h；保修 5 年
工业路由器KyRouter100KyRouter100-4G-W-L5-G工业级 4G 路由器；1×百兆 WAN + 4×百兆 LAN；2.4G WiFi；1×RS485 + 1×RS232；双 SIM 备份9-36VDC（推荐 24VDC），3 芯插拔式端子-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式适用全球频段；内置 15KV ESD 保护；VPN（OpenVPN/N2N/IPsec/L2TP/GRE）；<10W；120×105×35mm；MTBF >300000h；保修 5 年
工业路由器KyRouter100KyRouter100-4G-W-L5同上，适用中国等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B1/3/5/8；LTE TDD B34/38/39/40/41；WCDMA B1/8；GSM/GPRS/EDGE 900/1800MHz
工业路由器KyRouter100KyRouter100-4G-W-L5-EU同上，适用欧洲或亚太等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B1/3/5/7/8/20；WCDMA B1/5/8；GSM/GPRS/EDGE 850/900/1800MHz
工业路由器KyRouter100KyRouter100-4G-W-L5-EAU同上，适用澳洲、欧洲或亚太等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B1/3/5/7/8/20/28；LTE TDD B38/40/41；WCDMA B1/5/8
工业路由器KyRouter100KyRouter100-4G-W-L5-JP同上，适用日本、韩国或亚太等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B1/3/8/11/18/19/21/26/28；LTE TDD B41；WCDMA B1/6/8/19
工业路由器KyRouter100KyRouter100-4G-W-L5-LA同上，适用南美洲、拉美等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B1/2/3/4/5/7/8/12/17/28/66；LTE TDD B38/40；WCDMA B1/2/3/4/5/8
工业路由器KyRouter100KyRouter100-4G-W-L5-AM同上，适用北美洲（美国、加拿大）等兼容频段国家9-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式LTE FDD B2/4/5/12/13/17/66/71；WCDMA B2/4/5
工业路由器KyRouter100KyRouter100-5G-W-L5工业级 5G 路由器；1×百兆 WAN + 4×百兆 LAN；2.4G WiFi；1×RS485 + 1×RS2329-36VDC（推荐 24VDC）-20℃ ～ +70℃IP40 / DIN 卡轨式或壁挂式适用中国；5G 形态支持 2/4 根蜂窝外置天线；信号指示灯 ×3
Brand & positioning

A mainstream domestic choice for industrial Ethernet

About Kyland

Kyland Technology (北京东土科技股份有限公司) is one of China's principal industrial Ethernet switch manufacturers. Its portfolio spans managed and unmanaged industrial switches, media converters, edge gateways, serial servers and industrial wireless access, widely deployed in power, rail transit, oil and petrochemical, smart manufacturing, renewable generation and energy storage.

  • Listed company: Shenzhen Stock Exchange ChiNext, ticker 300353
  • Portfolio: managed / unmanaged switches, media converters, edge gateways, serial servers, wireless
  • Domestic content option: KPS3204A / KPS3408A serial servers use 100% domestic components
  • Redundancy: DT-Ring recovery <50 ms; DRP/DHP/MRP <20 ms
  • Time sync: hardware-based IEEE 1588 PTPv2 with ±100 ns accuracy

Covered on this page

17 product families / 51 regular models, with specifications taken line by line from the manufacturer datasheets.

  • Managed switches: SICOM3000A / SICOM3000A-PN, SICOM3024P, SICOM2024M (rack-mount), DGICOM3000
  • Unmanaged switches: Opal20 / Opal10G / Opal8G / Opal8 / Opal5 (incl. all-copper Opal5-5T / Opal8-8T), Amber5G / Amber8G, Amber5
  • Media converters: KOM300F
  • Edge gateways and serial servers: KGW3000AL, KPS3204A / KPS3408A (domestic content)
  • Industrial wireless and routers: KyRouter100 (4G / 5G industrial router), KyAir100E (dual-5 GHz AGV terminal), KyAir810BA (Wi-Fi 6 IS board)

Open the model & specification table (51 records)

Note on language: the manufacturer datasheets for these products are published in Chinese. An English overview and the full model table are provided here; the original Chinese datasheets are available from us on request, and we can supply translated specification sheets for a specific model if needed.
Product overview

17 product families

Click any product to jump to its specifications.

SICOM3000A / SICOM3000A-PN

SICOM3000A / SICOM3000A-PN

Layer 2 managed DIN-rail industrial Ethernet switch

SICOM3024P

SICOM3024P

28G-port Layer 2 all-gigabit managed rack switch

SICOM2024M

SICOM2024M

24T+4G-port Layer 2 managed rack-mount switch

DGICOM3000

DGICOM3000

6-port Layer 2 managed DIN-rail switch

Opal20

Opal20

16 + 2G port unmanaged DIN-rail switch

Opal10G

Opal10G

10G-port all-gigabit unmanaged DIN-rail switch

Opal8G

Opal8G

8G-port all-gigabit unmanaged DIN-rail switch

Opal8

Opal8

8-port Layer 2 unmanaged DIN-rail switch

Opal5

Opal5

5-port unmanaged DIN-rail switch

Amber5G / Amber8G

Amber5G / Amber8G

5 / 8-port all-gigabit unmanaged DIN-rail switch

Amber5

Amber5

5-port unmanaged DIN-rail switch

KOM300F

KOM300F

3-port DIN-rail industrial Fast Ethernet media converter

KGW3000AL

KGW3000AL

Economical edge gateway (data acquisition + protocol conversion)

KPS3204A / KPS3408A

KPS3204A / KPS3408A

Fully domestic-content three-in-one serial server

KyRouter100

KyRouter100

Industrial 4G / 5G wireless router

KyAir100E

KyAir100E

Dual-5 GHz wireless terminal for AGVs

KyAir810BA

KyAir810BA

Wi-Fi 6 intrinsically safe wireless access board

Managed switches

SICOM3000A / SICOM3000A-PN / SICOM3024P / SICOM2024M / DGICOM3000

Managed switches

SICOM3000A / SICOM3000A-PN

Layer 2 managed DIN-rail industrial Ethernet switch

The widest port range in the DIN-rail managed family — 6 to 20 ports — with DT-Ring, DRP/DHP and MRP redundancy, hardware-based IEEE 1588 PTPv2, and PROFINET support on the -PN models.

  • Redundancy: DT-Ring family recovery <50 ms; DRP/DHP/MRP <20 ms; STP/RSTP/MSTP/G.8032 ERPS
  • Security: HTTPS/SSL, SSH, TACACS+, IEEE 802.1X, RADIUS, user levels, port MAC binding
  • Hardware-based IEEE 1588 PTPv2 (BC / P2P TC / E2E TC, ±100 ns accuracy)
  • PROFINET (conformance class B, IO diagnostics, GSD file, STEP7 configuration) on -PN models; also EtherNet/IP and Modbus/TCP
  • DDM on SFP ports, automatic configuration backup and restore
SICOM3000A / SICOM3000A-PN
SICOM3000A / SICOM3000A-PN — Layer 2 managed DIN-rail industrial Ethernet switch

SICOM3000A / SICOM3000A-PN key specifications

SwitchingVLAN 4K (ID 1-4094); multicast groups 8K; MAC table 8K; packet buffer 4 Mbit; backplane 40 Gbps
Forwarding rate1.5 Mpps (2SFP8T) to 29.8 Mpps (4GX16GE / 12GX8GE) depending on ports
Latency / jumbo<5 µs; jumbo frame 9.6 KB
PortsGigabit: 100Base-X / 1000Base-X / 10-100-1000Base-T(X) SFP, or RJ45; Fast Ethernet: 100Base-X SFP / RJ45
Alarm port3-pin 5.08 mm pluggable terminal, 250 VAC / 220 VDC max, 2 A max
PowerHV: 100-240 VAC / 110-220 VDC (85-264 VAC / 77-300 VDC) single input; L2-L2: 24-48 VDC (18-72 VDC) redundant; L5-L5: 12-24 VDC (9-36 VDC) redundant
Power draw / weight<11 W (4GX8T) to <20 W (4GX16GE, 12GX8GE); 1.1 kg to 1.9 kg depending on width
Width66×135×107.5 mm (6T/8T/2GX8T/4GX8T); 88×135×137 mm (8GE/2GX8GE/4GX8GE); 102×135×137 mm (16T/16GE/2GX16T/2GX16GE/4SFP16T/4GX16T/4GX16GE/8SFP8T/8GX8T/8GX8GE/12GX8GE)
Protection / mountingIP40 or better; metal housing, fanless; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty1,272,643 h to 1,681,195 h depending on model; 5-year warranty
Certifications / standards:CE, FCC; EMC EN 55032/35, EN 61000-6-4, EN 61000-6-2; rail EN 50121-4; UL61010, Class I Div 2, IECEx, ATEX Zone 2 (Ex ec nC IIC T4 Gc); IEC61850-3, IEEE1613; PROFINET Conformance Class B; IEC 62368-1
Typical applications: Factory automation, rail transit, oil and gas, wind power, power distribution
Managed switches

SICOM3024P

28G-port Layer 2 all-gigabit managed rack switch

A 19-inch 1U all-gigabit managed switch for harsh EMC environments, supporting up to 28 gigabit ports with optional Bypass ports.

  • Up to 28 gigabit ports, mixing combo, fibre and copper
  • Optional Bypass ports (pass-through on power loss)
  • DRP, DT-Ring plus RSTP/MSTP and ERPS redundancy
  • HTTPS/SSL, SSH, TACACS+, IEEE 802.1X, RADIUS and user-level security
  • Hardware-based PTP; NTP / PTPv2 time management
SICOM3024P
SICOM3024P — 28G-port Layer 2 all-gigabit managed rack switch

SICOM3024P key specifications

Switching8 priority queues; VLAN 4K; MAC table 16K; ACL 512; switching capacity 56 Gbps; forwarding 83.3 Mpps; latency <10 µs; jitter <1 µs
StandardsIEEE 802.3i/3u/3ab/3z/3ad/3x, 802.1p/Q/d/w/s/x/ab
Alarm port3-pin 5.08 mm terminal, 250 VAC / 220 VDC max, 2 A max, 60 W max
Power100-240 VAC 50/60 Hz; 110-220 VDC; 24-48 VDC; ±20%; dual input; overload, reverse and redundancy protection
Power draw / weight<45 W; <3 kg
Dimensions / mounting440×44×318.8 mm (W×H×D); 19-inch 1U rack; metal, fanless; IP40
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty>200,000 h; 5-year warranty
Certifications / standards:EMI: FCC CFR47 Part 15, EN55032/CISPR22 Class A; reinforced EMS: ESD ±8 kV contact / ±15 kV air, EFT power ±4 kV / data ±2 kV, surge power ±2 kV DM ±4 kV CM / data ±2 kV; IEC61000-4-8/4-12/4-16
Typical applications: Power, rail transit and petrochemical systems with strict EMC requirements
Managed switches

SICOM2024M

24T+4G-port Layer 2 managed rack-mount switch

A Layer 2 managed industrial Ethernet switch designed for industrial communication systems, supporting up to 4 gigabit SFP ports and 24 Fast Ethernet copper ports. 19-inch rack-mount installation with front or rear panel mounting. It provides rich Layer 2 software features including ports, VLAN, multicast, QoS and fast redundancy rings, with Console, Telnet, Web and SNMP-based management. Widely used in power, rail transit, intelligent transportation and automatic control.

  • 4× 1000Base-X SFP + 24× 10/100Base-T(X) RJ45 copper
  • IEC62439-6 DRP/DHP redundancy, network healing time <20 ms
  • Optical DDM support plus multiple alarm types and log upload
  • 19-inch 1U rack-mount, metal housing, fanless natural cooling
SICOM2024M
SICOM2024M — 24T+4G-port Layer 2 managed rack-mount switch

SICOM2024M key specifications

SwitchingPriority queues 8; VLANs 4K; multicast groups 511; MAC table 8K; packet buffer 4.1 Mbit; forwarding rate 9.5 Mpps; latency <10 µs
Interfaces1000Base-X SFP ×4; 10/100Base-T(X) RJ45 ×24; Console RS232 RJ45 ×1; alarm port 3-pin 3.81 mm pluggable
Power24-48 VDC (18-72 VDC); 100-240 VAC 50/60 Hz; 110-220 VDC (85-264 VAC / 77-300 VDC); 5-pin 5.08 mm pluggable; <13 W; overload, reverse-polarity and redundant protection
Dimensions / weight482.6×44×200 mm (W×H×D); <3 kg; metal housing, fanless; IP40; 19-inch 1U rack
Operating temperature-40°C to +85°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty318,296 h; 5-year warranty
Certifications / standards:EMI: FCC CFR47 Part 15, EN55022/CISPR22 Class A; EMS (GB/T 17626 series): ESD ±6 kV contact / ±8 kV air, RS 10 V/m (80 MHz-1 GHz), EFT power ±2 kV / data ±1 kV, surge power ±1 kV DM ±2 kV CM / data ±2 kV, CS 10 V, power-frequency magnetic field 100 A/m, pulse magnetic field 1000 A/m, damped oscillatory 10 A/m, oscillatory wave 2 kV CM / 1 kV DM
Typical applications: Power, rail transit, intelligent transportation and automatic control
Managed switches

DGICOM3000

6-port Layer 2 managed DIN-rail switch

A compact managed switch with 2 gigabit SFP and 4 gigabit copper ports, supporting ERPS/STP/RSTP/MSTP ring protocols and managed via Console, Telnet, Web and SNMP.

  • 2× gigabit SFP (100Base-X / 1000Base-X / 10-100-1000Base-T(X)) + 4× gigabit copper
  • ERPS / STP / RSTP / MSTP ring protocols
  • CLI, Telnet and Web management plus SNMPv1/v2c/v3 network management (Kyvision)
  • IGMP Snooping, static multicast, link aggregation / LACP, port rate limiting and storm suppression
  • DDM on SFP ports, RMON, port mirroring, Syslog, LLDP, IPv4/IPv6, NTP client
DGICOM3000
DGICOM3000 — 6-port Layer 2 managed DIN-rail switch

DGICOM3000 key specifications

Switching8 priority queues; VLAN 4094 (ID 1-4093); multicast groups 4K; MAC table 4K; buffer 2 Mbit; forwarding 8.93 Mpps; latency <5 µs; jumbo 9216 bytes
Interfaces2× gigabit SFP; 4× gigabit RJ45; Console RS232 / RJ45
Power12-48 VDC, 4-pin 3.81 mm terminal; <10 W; overload, reverse and redundancy protection
Dimensions / weight50×121×80 mm (W×H×D); 1.0 kg; metal, fanless; IP40; DIN-rail
Operating temperature-30°C to +70°C; storage -40°C to +85°C; humidity 5-95% non-condensing
Warranty3 years; MTBF >100,000 h
Certifications / standards:CE, FCC; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A; mechanical IEC60068-2-6 / -2-27 / -2-32
Typical applications: Highways, renewable power generation, energy storage, smart manufacturing
Unmanaged switches

Opal20 / Opal10G / Opal8G / Opal8 / Opal5 / Amber5G / Amber8G / Amber5

Unmanaged switches

Opal20

16 + 2G port unmanaged DIN-rail switch

Flexible port combination with reliable performance: 2 gigabit SFP ports plus 16 Fast Ethernet copper ports and redundant power input. A top-mounted DIP switch controls broadcast storm suppression and QoS, suiting dense access inside automation cabinets.

  • 2×(100Base-X / 1000Base-X) SFP ports with rate adaptation; 16× Fast Ethernet RJ45
  • QoS support for more rational bandwidth allocation
  • DIP switches: broadcast storm suppression on/off, QoS on/off
  • Full-load power below 7 W; meets industrial grade 3 EMC
  • IP40 metal housing, -40°C to +75°C
Opal20
Opal20 — 16 + 2G port unmanaged DIN-rail switch

Opal20 key specifications

SwitchingMAC table 8K; buffer 2 Mbit; forwarding 5.7 Mpps; latency <10 µs; jumbo 9216 bytes
Interfaces2× gigabit SFP; 16× 10/100Base-T(X) RJ45; Console RS232 / RJ45 (supports firmware upgrade)
DIP switchesBroadcast storm suppression on/off; QoS on/off
Power12-48 VDC, 4-pin 5.08 mm terminal; <7 W; overload, reverse and redundancy protection
Dimensions / weight44×162×115 mm (W×H×D); 0.5 kg; metal, fanless; IP40; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty825,432 h; 5-year warranty
Certifications / standards:CE, FCC; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A; EMS ESD ±6 kV/±8 kV, RS 10 V/m, EFT, surge, CS 10 V; mechanical IEC60068-2-6 / -2-27 / -2-32
Typical applications: Factory automation, dense access inside industrial control cabinets
Unmanaged switches

Opal10G

10G-port all-gigabit unmanaged DIN-rail switch

All-gigabit ports, compact and economical: 2 gigabit SFP ports plus 8 gigabit copper ports with a built-in isolated power supply. Typically used for high-bandwidth Ethernet in factory automation, petrochemical and intelligent transportation.

  • 2× 1000Base-X SFP + 8× 10/100/1000Base-T(X) RJ45
  • Built-in isolated power supply, full-load power below 6.9 W
  • Jumbo frame support (up to 9 KB)
  • Meets industrial grade 3 EMC; IP40 metal housing
  • UL61010, Class I Div 2 certified (suitable for hazardous locations)
Opal10G
Opal10G — 10G-port all-gigabit unmanaged DIN-rail switch

Opal10G key specifications

SwitchingMAC table 4K; buffer 1.5 Mbit; forwarding 14.9 Mpps; latency <5 µs; jumbo 9 KB
Interfaces2× 1000Base-X SFP; 8× 10/100/1000Base-T(X) RJ45
Power12-48 VDC / 18-30 VAC, 4-pin 5.08 mm terminal; 6.9 W; overload, reverse and redundancy protection
Dimensions / weight53.6×135×108 mm (W×H×D); 0.5 kg; metal, fanless; IP40; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty6,363,643 h; 5-year warranty
Certifications / standards:CE, FCC; UL61010, Class I Div 2; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A; EMS ESD ±6 kV/±8 kV, RS 10 V/m, EFT, surge, CS 10 V
Typical applications: High-bandwidth Ethernet for factory automation, petrochemical and intelligent transportation
Unmanaged switches

Opal8G

8G-port all-gigabit unmanaged DIN-rail switch

A compact 8-port all-gigabit unmanaged switch with redundant power input and a built-in isolated supply. Available in a standard form (Opal8G, IP40) and a compact form (Opal8G-W, IP30) to suit different cabinet spaces.

  • 8× 10/100/1000Base-T(X) RJ45 gigabit ports
  • Built-in isolated power supply, full-load power below 5 W
  • Jumbo frame support (up to 9 KB)
  • Two forms: Opal8G is IP40 / 31×147×94 mm; Opal8G-W is IP30 / 45.6×100.5×101 mm
  • UL61010, Class I Div 2 certified
Opal8G
Opal8G — 8G-port all-gigabit unmanaged DIN-rail switch

Opal8G key specifications

SwitchingMAC table 4K; buffer 1.5 Mbit; forwarding 11.9 Mpps; latency <5 µs; jumbo 9 KB
Interfaces8× 10/100/1000Base-T(X) RJ45
Power12-48 VDC / 18-30 VAC, 4-pin 5.08 mm terminal; 5 W; overload, reverse and redundancy protection
Dimensions / weightOpal8G: 31×147×94 mm / 0.4 kg (IP40); Opal8G-W: 45.6×100.5×101 mm / 0.3 kg (IP30)
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty7,862,765 h (Opal8G) / 6,856,926 h (Opal8G-W); 5-year warranty
Certifications / standards:CE, FCC; UL61010, Class I Div 2; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A; EMS ESD ±6 kV/±8 kV, RS 10 V/m, EFT, surge, CS 10 V
Typical applications: High-bandwidth Ethernet for factory automation, petrochemical and intelligent transportation
Unmanaged switches

Opal8

8-port Layer 2 unmanaged DIN-rail switch

Designed for industrial automation control, with 2 optional fibre/copper ports and 6 copper ports, plus a wide-temperature version covering -40 to +75°C. The same series also offers an all-copper Opal8-8T (8× Fast Ethernet copper, IP30, 29.6×147×95 mm) for installations that need no fibre.

  • 2 optional Fast Ethernet fibre or copper ports + 6 copper ports (1-fibre/7-copper models also available)
  • SC fibre interfaces, single-mode 40 km or multi-mode 5 km
  • Top-mounted DIP switch enables or disables broadcast storm suppression
  • Wide-temperature version (-40 to +75°C), IP30 metal housing
Opal8
Opal8 — 8-port Layer 2 unmanaged DIN-rail switch

Opal8 key specifications

SwitchingMAC table 2K; buffer 1 Mbit; forwarding 1.2 Mpps; latency <10 µs
Interfaces1-2 × 100Base-FX single/multi-mode SC; 6-7 × 10/100Base-T(X) RJ45
Power12-48 VDC / 18-30 VAC, 4-pin 5.08 mm terminal; <4.6 W; overload, reverse and redundancy protection
Dimensions / weight45.6×114.5×68 mm (W×H×D); 0.3 kg; IP30; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
Warranty5 years; MTBF 4,044,813 h
Certifications / standards:CE, FCC; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A
Typical applications: Industrial automation control
Unmanaged switches

Opal5

5-port unmanaged DIN-rail switch

Designed for industrial automation control: 1 Fast Ethernet SFP fibre port plus 4 Fast Ethernet copper ports, redundant power input and a built-in isolated supply — suited to fibre access at field devices. The same series also offers an all-copper Opal5-5T (5× Fast Ethernet copper, IP30, 29.6×114.5×68 mm) for installations that need no fibre.

  • 1× 100Base-X SFP + 4× 10/100Base-T(X) RJ45
  • Built-in isolated power supply, full-load power below 2.5 W
  • Meets industrial grade 3 EMC; IP40 metal housing
  • UL61010, Class I Div 2 certified
Opal5
Opal5 — 5-port unmanaged DIN-rail switch

Opal5 key specifications

SwitchingMAC table 2K; buffer 1 Mbit; forwarding 0.75 Mpps; latency <10 µs
Interfaces1× 100Base-X SFP; 4× 10/100Base-T(X) RJ45
Power12-48 VDC / 18-30 VAC, 4-pin 5.08 mm terminal; 2.4 W; overload, reverse and redundancy protection
Dimensions / weight31×114.5×94 mm (W×H×D); 0.3 kg; metal, fanless; IP40; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty8,502,760 h; 5-year warranty
Certifications / standards:CE, FCC; UL61010, Class I Div 2; EMI FCC CFR47 Part 15, EN55032/CISPR22 Class A; EMS ESD ±6 kV/±8 kV, RS 10 V/m, EFT, surge, CS 10 V
Typical applications: Fibre access at field devices in industrial automation control
Unmanaged switches

Amber5G / Amber8G

5 / 8-port all-gigabit unmanaged DIN-rail switch

Plug-and-play all-gigabit unmanaged switches. DIP switches enable QoS, flow control, storm suppression and forced 100 Mbit operation without any management.

  • 5 or 8 gigabit copper ports, plug and play
  • DIP switches: 1 forced 100 Mbit, 2 storm suppression, 3 port flow control, 4 QoS
  • Jumbo frame support (9216 bytes)
  • -25°C to +75°C operating range, industrial grade 3 EMC
  • IP40 protection
Amber5G / Amber8G
Amber5G / Amber8G — 5 / 8-port all-gigabit unmanaged DIN-rail switch

Amber5G / Amber8G key specifications

SwitchingMAC table 2K (5GE) / 4K (8GE); buffer 2 Mbit; forwarding 7.44 Mpps (5GE) / 11.9 Mpps (8GE); jumbo 9216 bytes
Interfaces5 or 8 × 10/100/1000Base-T(X) RJ45
Power12-48 VDC redundant, 4-pin 5.08 mm terminal; <5 W; overload, reverse and redundancy protection
Dimensions / weight5GE 30×108×86 mm; 8GE 30×146.5×86 mm (W×H×D); 0.4 kg
Protection / mountingIP40; metal, fanless; DIN-rail
Operating temperature-25°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
Certifications / standards:CE, FCC; industrial grade 3 EMC
Typical applications: Highways, renewable power generation, energy storage, smart manufacturing
Unmanaged switches

Amber5

5-port unmanaged DIN-rail switch

The most economical 5-port Fast Ethernet unmanaged DIN-rail switch, plug and play, rated from -30°C to +70°C.

  • 5 Fast Ethernet copper ports, plug and play
  • -30°C to +70°C ambient temperature range
  • Meets industrial grade 3 EMC requirements
  • IP40 protection; metal housing, fanless
Amber5
Amber5 — 5-port unmanaged DIN-rail switch

Amber5 key specifications

SwitchingMAC table 1K; buffer 448 Kbit; forwarding 0.75 Mpps; latency <10 µs
Interfaces5 × 10/100Base-T(X) RJ45
Power12-48 VDC, 4-pin 5.08 mm terminal; <4 W; overload, reverse and redundancy protection
Dimensions / weight32×103×77 mm (W×H×D); 0.3 kg; IP40; DIN-rail
Operating temperature-30°C to +70°C; storage -40°C to +85°C; humidity 5-95% non-condensing
Warranty3 years; MTBF >100,000 h
Certifications / standards:CE, FCC; industrial grade 3 EMC
Typical applications: Highways, renewable power generation, energy storage, smart manufacturing
Media converters

KOM300F

Media converters

KOM300F

3-port DIN-rail industrial Fast Ethernet media converter

A 1-fibre + 2-copper Fast Ethernet media converter, plug and play, drawing as little as 2.2 W at full load, available in LV and HV power versions and rated from -40°C to +75°C.

  • Green industrial Ethernet series — full-load power draw as low as 2.2 W
  • 1 Fast Ethernet fibre port (SC, single-mode 40 km / multi-mode 5 km) + 2 copper ports
  • Wide power input range: LV (12-48 VDC redundant) or HV (100-240 VAC / 110-220 VDC single)
  • IP40 protection, vibration-resistant DIN-rail mount, -40°C to +75°C
  • Meets industrial grade 3 EMC requirements
KOM300F
KOM300F — 3-port DIN-rail industrial Fast Ethernet media converter

KOM300F key specifications

SwitchingMAC table 2K; buffer 1 Mbit; forwarding 0.8 Mpps; latency <5 µs
Interfaces100Base-FX single/multi-mode SC; 2 × 10/100Base-T(X) RJ45
PowerLV: 12-48 VDC, 4-pin 5.08 mm terminal, <2.2 W, redundancy protection; HV: 100-240 VAC 50/60 Hz / 110-220 VDC (85-264 VAC / 77-300 VDC), 3-pin 7.62 mm terminal, <2 W
Dimensions / weight30×115×91.5 mm (W×H×D); 0.4 kg; IP40; DIN-rail or wall mount
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
Warranty5 years; MTBF 478,852 h
Certifications / standards:CE, FCC; EMC EN 55032 / EN 61000-6-4 / EN 61000-6-2; IEC 62368-1, EN 62368-1
Typical applications: Power, transportation, oil and petrochemical industries
Edge gateways and serial servers

KGW3000AL / KPS3204A / KPS3408A

Edge gateways

KGW3000AL

Economical edge gateway (data acquisition + protocol conversion)

Deployed as an intelligent communication node in industrial networks, providing data acquisition and protocol conversion over 3G/4G/WiFi/Ethernet/serial. With the Kyland device cloud it enables PLC data upload/download and remote maintenance.

  • 2 Ethernet ports; 2× RS485 + 1× RS232; some models add 4 DI + 4 DO
  • Optional 4G cellular and optional 2.4G WiFi access
  • Dual-NIC bridging/cascading, or two independent NICs on different subnets
  • Transparent data transmission plus many common protocol conversions; NAT (16 forwarding rules)
  • Web and KyPMT configuration; connects to the Kyland device cloud platform
  • Security: SSH, SSL, MAC filtering, user levels, OpenVPN, AES/DES/3DES encryption
  • SMTP email alarms, reconnection, Syslog, SNMP v1/v2c + Trap, DHCP client, NTP client, static routing
KGW3000AL
KGW3000AL — Economical edge gateway (data acquisition + protocol conversion)

KGW3000AL key specifications

SystemDual-core A7 1.2 GHz; 128 MB RAM; 256 MB NAND flash
Ethernet2 × 10/100 Mbps copper
Serial2× RS485 + 1× RS232, terminal block; data bits 5/6/7/8, stop bits 1/2, parity None/Even/Odd, 2400-115200 bps
IO4 DI; 4 DO (not supported on some models)
WiFiIEEE 802.11b/g/n 2.4 GHz, 15±2 dBm (not supported on some models)
Cellular bandsLTE FDD B1/B3/B5/B8; LTE TDD B38/B39/B40/B41; WCDMA B1/B8; TD-WCDMA B34/B39; CDMA BC0; GSM 900/1800 MHz
Other interfaces1× USB; 1× Console; one-key factory reset
Power9-36 VDC, 3-pin pluggable terminal; overload and reverse protection; <5 W
Dimensions / mounting45×130×120 mm (W×H×D); aluminium extrusion, fanless; IP40; DIN-rail
Operating temperature-20°C to +70°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warrantyMTBF >300,000 h; 5-year warranty
Firmware protocolsModbus RTU, Modbus TCP, OPC UA, DNP3.0, DL/T645-2007, DL/T645-1997, IEC-60870-101/103/104, S7, MQTT
Certifications / standards:EMI FCC CFR47 Part 15, EN55022/CISPR22 Class A; EMS including IEC61000-4-8/4-9/4-10/4-12/4-16
Typical applications: Distributed device connectivity, PLC data upload/download and remote maintenance, remote serial access
Serial servers

KPS3204A / KPS3408A

Fully domestic-content three-in-one serial server

A three-in-one serial server with 100% domestically produced components, bringing 4 or 8 RS232/RS485/RS422 devices online immediately. Each port is independently configurable and serial ports offer 2 kV isolation.

  • 100% domestically produced components
  • 2/4 Ethernet ports and 4/8 serial ports (RS232/RS485/RS422, independently configurable)
  • Redundant dual power input; 2 kV serial isolation; 120 Ω termination software-enabled/disabled
  • Modbus RTU to Modbus TCP conversion
  • Socket modes: TCP Server, TCP Client and UDP transparent transmission
  • AES/DES/3DES encryption, SSH, SSL, MAC filtering, user levels
  • SMTP email alarms, one-key reset, reconnection, Web / KyCMT management
KPS3204A / KPS3408A
KPS3204A / KPS3408A — Fully domestic-content three-in-one serial server

KPS3204A / KPS3408A key specifications

SystemDomestic 4-core A53 1.5 GHz; 2 GB domestic RAM; 16 GB domestic eMMC
Ethernet10/100Base-T(X) RJ45 Fast Ethernet; 100Base-X SFP on some models
SerialRS232/RS485/RS422, DB9 male, 2 kV isolation; data bits 5/6/7/8, stop bits 1/2, parity None/Even/Odd, 50-230,400 bps
Transmission modesTransparent data transmission / Modbus RTU-TCP transparent conversion
Power12-48 VDC, pluggable terminal; overload, reverse and redundancy protection
Power draw / weightKPS3204A 10 W / KPS3408A 15 W; net weight KPS3204A 0.7 kg / KPS3408A 1.0 kg; gross weight KPS3204A 0.9 kg / KPS3408A 1.2 kg
Dimensions / mountingDevice (W×H×D): KPS3204A 45×150×120 mm; KPS3408A 79×150×120 mm. Packaging: KPS3204A 70×236×197 mm; KPS3408A 133×197×236 mm. Metal, fanless; IP40; wall or rail mount
Clock / maintenanceNTP client; Web firmware upgrade, FTP / TFTP, Syslog, SMTP email alarms, reconnection
Operating temperature-40°C to +75°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty>300,000 h; 5-year warranty
Certifications / standards:EMI FCC CFR47 Part 15, EN55022/CISPR22 Class A; EMS including IEC61000-4-8/4-9/4-10/4-12/4-16; mechanical IEC60068-2-6 vibration, IEC60068-2-27 shock, IEC60068-2-32 free fall
Typical applications: Serial device connectivity for domestic-substitution projects in power, energy and transportation
Industrial wireless and routers

KyRouter100 / KyAir100E / KyAir810BA

Industrial routers

KyRouter100

Industrial 4G / 5G wireless router

Supports 5G/4G/3G, WiFi and Ethernet for long-distance data transmission. Provides 1 Fast Ethernet WAN, 4 Fast Ethernet LAN ports, one RS485 and one RS232, dual-SIM backup and several VPN tunnels so field data travels through a secured channel.

  • Rich interfaces: 3G/4G/WiFi/serial/Ethernet simultaneously; dual-SIM backup
  • 2.4 GHz WiFi supporting AP / STA / relay modes
  • 1× Fast Ethernet WAN + 4× Fast Ethernet LAN; 1× RS485 + 1× RS232 (terminal block)
  • VPN: OpenVPN, N2N, IPsec, L2TP/PPTP, GRE; plus NAT, DMZ, port mapping and access control
  • Industrial design with wide temperature and voltage range; DIN-rail or wall mount; built-in 15 kV ESD protection
  • KyPMT and Web management, SNMP v1/v2c + Trap, Syslog, SMTP email alarms, reconnection
KyRouter100
KyRouter100 — Industrial 4G / 5G wireless router

KyRouter100 key specifications

SystemIndustrial 32-bit communication processor; 128 MB RAM; 32 MB NOR flash
SIMStandard drawer-type socket ×2; supports 1.8 V / 3 V SIM/UIM cards
Ethernet1× FE WAN 10/100M auto-negotiating; 4× FE LAN 10/100M; both with built-in 1.5 kV isolation
Serial1× RS485 + 1× RS232, terminal block; data bits 5/6/7/8, stop bits 1/2, parity None/Even/Odd, 2400-115,200 bps
WiFiIEEE 802.11b/g/n 2.4 GHz; 15±2 dBm; one external WiFi antenna
Cellular bands4G form: 1-2 external antennas; 5G form: 2-4. Regional variants -G / -EU / -EAU / -JP / -LA / -AM and no suffix (China)
Network protocolsAPN, VPDN; authentication CHAP/PAP/MS-CHAP/MS-CHAPv2; WAN static IP / DHCP / PPPoE; static and dynamic routing
Power9-36 VDC (24 VDC recommended), 3-pin pluggable terminal; overload and reverse protection; <10 W
Dimensions / weight120×105×35 mm (excluding antenna and mounting); metal, fanless; IP40; DIN-rail
Operating temperature-20°C to +70°C; storage -40°C to +85°C; humidity 5-95% non-condensing
MTBF / warranty>300,000 h; 5-year warranty
Certifications / standards:See the manufacturer datasheet — cellular bands differ by regional model, so confirm the destination country's bands and approvals before export
Typical applications: Remote access to unmanned sites, data backhaul from charging piles and distribution cabinets, field device connectivity requiring VPN tunnels
Industrial wireless

KyAir100E

Dual-5 GHz wireless terminal for AGVs

Searches and connects on two 5 GHz bands simultaneously with fast, seamless roaming and zero-switch handover. An integrated 5-port gigabit switch makes it purpose-built for AGVs and mobile robots.

  • 802.11ac, 2×2 spatial streams, up to 867 Mbps per band
  • Two 5 GHz bands searched and connected simultaneously for strong interference immunity
  • 5 gigabit network interfaces (4 LAN + 1 WAN), integrated 5-port switch
  • Roaming enhancement plus automatic channel selection minimises link discovery time and protects real-time data
  • DIN-rail, wall and bracket mounting; wide 12-48 VDC input
KyAir100E
KyAir100E — Dual-5 GHz wireless terminal for AGVs

KyAir100E key specifications

Processor / memoryIPQ4029; 256 MB DDR3L RAM; 32 MB flash
Frequency / MIMODual 5 GHz; 5G0 2×2 867 Mbps; 5G1 2×2 867 Mbps
Max transmit power5G0 / 5G1: 24 dBm @ VHT20 MCS0 (±2 dBm tolerance)
Interfaces5 × 10/100/1000 Mbps (4 LAN + 1 WAN); 1× RS485 Phoenix terminal; 1× reset button
Antenna5 dBi gain; 360° omnidirectional beamwidth
Power12-48 VDC via Phoenix terminal, single input
Dimensions / mounting140×90×32 mm (L×W×H); wall mount; metal housing
Operating temperature-20°C to +55°C; storage -40°C to +85°C; humidity 5-90% RH non-condensing; IP41
Certifications / standards:See the manufacturer datasheet (wireless terminal for AGV applications)
Typical applications: Wireless connectivity for AGVs and mobile/handling robots
Industrial wireless

KyAir810BA

Wi-Fi 6 intrinsically safe wireless access board

An IEEE 802.11ax industrial wireless access board designed as an intrinsically safe circuit (single 12-24 VDC IS input). Dual-band simultaneous operation and up to 2975 Mbps make it suitable for embedded use in hazardous-area or compact equipment.

  • Wi-Fi 6 (802.11ax) intrinsically safe board, up to 2975 Mbps access rate
  • 2.4 GHz and 5.8 GHz simultaneously, 2×2 MIMO with mixed 2.4G & 5.8G output
  • Single 12-24 VDC IS input; full-load power draw under 12 W at 12 VDC
  • Maximum transmit power 27 dBm, adjustable in 1 dBm steps
  • Fat AP, thin AP, Client and WDS modes, switchable via Web configuration
  • Roaming with 802.11k / 802.11v / 802.11r, L2 and L3 roaming; Turbo roaming maintains primary and backup links
  • Security: 64/128-bit WEP, dynamic WEP, TKIP, CCMP, WPA3; with an AC, WPA/WPA2-PSK, WPA2-Enterprise, MAC, Web and PPPoE authentication
KyAir810BA
KyAir810BA — Wi-Fi 6 intrinsically safe wireless access board

KyAir810BA key specifications

DimensionsBoard 125×88.6×20 mm (L×W×H)
Interfaces2× 1000 Mbps copper; 2× SMA antenna connectors (2.4 GHz and 5 GHz combined)
Frequency bands2.4G: 802.11b/g/n/ax, 2.4-2.483 GHz; 5G: 802.11ax/ac/n/a, 5.150-5.350 GHz and 5.725-5.850 GHz
Max link rate575 Mbps on 2.4 GHz; 2400 Mbps on 5 GHz
Max transmit power27 dBm; 1 dBm adjustment granularity
Power / consumption12-24 VDC via Phoenix terminal; ≤14 W overall
Channel bonding / virtual APs40 MHz (2.4 GHz), 160 MHz (5 GHz); 16 virtual APs per radio; up to 1024 clients
Operating temperature-40°C to +70°C; storage -40°C to +70°C; humidity 0-95% non-condensing
MTBF>250,000 H
Certifications / standards:Designed as an intrinsically safe circuit (refer to the manufacturer certificate for Ex approvals)
Typical applications: Wireless access and embedded use in hazardous areas and compact industrial equipment
Accessories

Mounting hardware and tools

Part numberDescriptionApplicable to
DT-BGAZ-01壁挂安装板适用于 KOM300F、Opal8 等卡轨式设备
DT-BGAZ-02壁挂安装板适用于 SICOM3000A 系列
DT-FCZ-RJ45-01单口 RJ45 防尘罩适用于 Amber5、KOM300F、Opal8、SICOM3000A 等
KyACB-USB-RJ45自动配置备份和恢复工具配合 SICOM3000A 使用
SFP 模块工业级 SFP 光模块按《工业级 SFP 模块选购表》选配
Certification & compliance

Certification coverage (model dependent)

All certifications below are quoted from the individual product datasheets.

Main certifications

  • General: CE, FCC; EMC to EN 55032, EN 61000-6-2 / -6-4
  • Rail transit: EN 50121-4 (SICOM3000A series)
  • Power: IEC61850-3, IEEE1613 (SICOM3000A series)
  • Hazardous areas: UL61010, Class I Div 2, IECEx, ATEX Zone 2 (Ex ec nC IIC T4 Gc), selected models
  • Industrial protocol: PROFINET Conformance Class B (-PN models)
  • Safety: IEC 62368-1 / EN 62368-1

Selection notes

  • Do not select on port count alone. Ports, power and width are independent dimensions on SICOM3000A — the same port count can mean 66, 88 or 102 mm wide, so check cabinet space first.
  • PROFINET requires the -PN model. Standard models do not support it; S7/PROFINET engineering needs -PN.
  • Temperature and protection vary. Within the same switch family, operating temperature ranges from -25°C to -40°C and protection from IP30 to IP40.
  • Specifications come from individual datasheets. Datasheet revisions can differ — request the current datasheet and certificate copies before formal tendering.
Industry applications

Main application industries

Power

电力

Rail Transit

轨道交通

Oil & Gas

石油石化

Smart Manufacturing / Factory Automation

智能制造 / 工厂自动化

Renewable Power Generation

新能源发电

Energy Storage

储能

Highways

高速公路

Power Distribution

配网

AGV / Mobile Robotics

AGV / 移动机器人

Hazardous Areas & Energy

防爆与能源工业

Managed or unmanaged — not sure which you need?

Tell us your node count, distances, whether you need redundant ring topology and centralised network management, and we will propose a network architecture and selection list.

Get selection support Back to products