Models, key features and typical applications across both product lines. If you cannot find an exact match, send us your equipment list or current brand and model — we will propose a cross-reference.
Part one lists the 10 product families for which we hold the manufacturer datasheets (23 regular models, specifications verified line by line). Part two is the broader portfolio published on the manufacturer's website, useful for judging overall coverage.
| Product family | Type | Ports / interfaces | Key capabilities | Power | Operating temp. |
|---|---|---|---|---|---|
| SICOM3000A / SICOM3000A-PN | L2 managed, DIN-rail | 6–20 ports, 20 port combinations | DT-Ring <50 ms, DRP/DHP/MRP <20 ms, PTPv2 ±100 ns, PROFINET (-PN) | HV / 24-48 VDC / 12-24 VDC | -40 to +75°C |
| SICOM3024P | L2 all-gigabit managed, rack | Up to 28 gigabit ports, optional Bypass | 56 Gbps capacity, 83.3 Mpps, MAC 16K, hardware-based PTP | 100-240 VAC / 24-48 VDC | -40 to +75°C |
| DGICOM3000 | L2 managed, DIN-rail | 2× gigabit SFP + 4× gigabit copper | ERPS/STP/RSTP/MSTP, SNMPv1/v2c/v3, Kyvision management | 12-48 VDC redundant | -30 to +70°C |
| Amber5G / Amber8G | Unmanaged all-gigabit, DIN-rail | 5 or 8× gigabit copper | DIP switches for QoS / flow control / storm suppression / forced 100 Mbit; jumbo 9216 bytes | 12-48 VDC redundant | -25 to +75°C |
| Amber5 | Unmanaged Fast Ethernet, DIN-rail | 5× Fast Ethernet copper | Plug and play, most economical access model | 12-48 VDC redundant | -30 to +70°C |
| Opal8 | Unmanaged, DIN-rail | 1–2 fibre + 6–7 Fast Ethernet copper | SC interfaces, single-mode 40 km / multi-mode 5 km; DIP storm suppression | 12-48 VDC / 18-30 VAC | -40 to +75°C |
| KOM300F | Media converter, DIN-rail | 1× Fast Ethernet fibre + 2× Fast Ethernet copper | Full-load power as low as 2.2 W; LV and HV power versions | 12-48 VDC or 100-240 VAC | -40 to +75°C |
| KGW3000AL | Edge gateway | 2 copper + 2× RS485 + 1× RS232 (optional 4 DI / 4 DO) | Optional 4G / WiFi; NAT; OPC UA, MQTT, S7, IEC-60870-104 conversions | 9-36 VDC | -20 to +70°C |
| KPS3204A / KPS3408A | Domestic-content serial server | 2–4 copper (or 2 SFP + 2 copper) + 4–8 serial ports | 100% domestic components, 2 kV serial isolation, Modbus RTU-TCP conversion | 12-48 VDC redundant | -40 to +75°C |
| KyAir100E | Industrial wireless, AGV terminal | 4× gigabit LAN + 1× gigabit WAN (integrated 5-port switch) | Dual 5 GHz simultaneous, 867 Mbps per band, fast roaming, 5 dBi omni antenna | 12-48 VDC | -20 to +55°C |
| KyAir810BA | Industrial wireless, Wi-Fi 6 IS board | 2× gigabit copper + 2× SMA antenna | 802.11ax, up to 2975 Mbps, 27 dBm adjustable, intrinsically safe supply | 12-24 VDC IS | -40 to +70°C |
Full Kyland product documentation (10 families in detail) Model & specification table (30 records)
| Category | Series / models | Key features | Typical application |
|---|---|---|---|
| Unmanaged, DIN-rail | Opal5/8/10G/20, KIEN1005A | 5–20 ports, plug and play, DIN-rail, gigabit options | Field device access, edge connectivity |
| Managed, DIN-rail | SICOM3000, SICOM3000A, SICOM3000A-LITE, -PN | 8–20 port Layer 2; DRP/DHP/MRP recovery <20 ms; PTP ±100 ns; 12/24/48/110/220 V; IP40 | Factory automation, transport, petrochemical, wind, distribution |
| Managed, rackmount | SICOM3024, SICOM3432G, SICOM3028GPT | 20–32 ports plus 10G uplinks, 19-inch, Layer 2/3 | Project aggregation and core |
| Layer 3 backbone | SICOM6800-2U, SICOM6896G, SICOM8648X | 10G/all-10G, Layer 3 routing (OSPF/VRRP/PIM), modular | Backbone rings, rail and power core |
| TSN | SICOM3000TSN | IEEE 802.1AS/Qbv/Qci, centralized configuration, PTPv2, -40 to +75°C | Smart manufacturing, deterministic traffic |
| Domestic self-controllable | SICOM6800 series, DTKJ-6800, SICOM-6800G | Fully domestic supply chain; DTKJ-6800 for State Grid, SICOM-6800G for CSG process layer | Smart substations, domestic-substitution projects |
| Rail transit (EN50155) | Aquam8628/8128, Aquam8612/8112, Aquam8 (IP65), Aquam8624-KD | EN50155 compliant, CRCC certified, M12 connectors, domestic vehicle-grade options | High-speed and metro signalling, onboard networks |
| Intrinsically safe | SICOM6416GBA, SICOM3012BA, KIEN2010G-BA, KyAir810BA | Intrinsically safe, multi-serial, card-based | Petrochemical, mining, hazardous areas |
| PoE | SICOM6800-D, SICOM3000S, Opal10GS | Power over Ethernet, DIN-rail | Security, wireless APs, IP cameras |
| Redundancy & timing modules | HSR/PRP Module, TimeServer Module | Zero-loss redundancy, clock server expansion | Power and high-availability industrial rings |
Safety relays, safety interlocks, non-contact safety switches and safety light curtains, plus safety edges, mats and fencing — available as complete production-line safeguarding. Manufactured by Duoen Technology; the full range reaches up to PLe / SIL3.
| Series | Positioning | Typical models | Safety outputs | Key points |
|---|---|---|---|---|
| CN series | 2nd-gen patented | CNSC31S, CNUG31S, CNTC22S-99, CNTC31S-99 | 3NO+1NC instantaneous; delayed type 0–99 s | Function DIP switches, redundant supply terminals, per-channel LEDs |
| DN series | Standard | DNSC31S, DNSD31S, DNTC22S-99, DNTC31S-99 | 3NO+1NC instantaneous; delayed type 0–99 s | Conventional positive-guided output; best cost-performance baseline; DNSD31S for two-hand control |
| HN series | Configurable | HNUG20S-99, HNUG20P-99 | 2NO (instantaneous or delayed) | 4SI + 2SO + 2SS + 2DI; Type-C USB and NFC configuration; three units can replace a small safety PLC |
| Extension | Function expansion | DNB41S, CNBE40S, CNBE31S, CNBE20S, CNBE11S | 4NO+1NC / 4NO / 3NO+1NC / 2NO / 1NO+1NC | Relay output extension, safety PLC expansion and safety coupling (including petrochemical SIS) |
| Series | Type | Typical models | Key data | Typical applications |
|---|---|---|---|---|
| Guardian EN | Non-contact (magnetic / RFID coded) | ENQQC11-3M, ENQQM20L-3M, ENQQF22L-M12-8 | IP69K; -25 to 90°C (high-temp range); outputs up to 2+2; up to 30 units in series | Food packaging, 3C semiconductor, injection moulding, pharmaceutical, glass machinery |
| Bodyguard T3 | Solenoid interlock (Oxon-T3) | Oxon-T3PAM-11/11 and 24 models | 2000 N holding force; 1,000,000 mechanical operations; IP67; 4 × 90° rotatable head | Safety doors and windows, robot fencing |
| Bodyguard M1 | Solenoid interlock (Guard-M1) | Guard-M1CAPT-11/11 and 39 models | Very compact; 1400 N holding force; IP67; cable or terminal versions | Space-restricted machine guards |
| Bodyguard G1 | Compact mechanical (Monit-G1) | Monit-G1CPT-30 and 5 models | Mechanical interlock, no solenoid locking; IP67; 3 m cable pre-fitted | Conventional guards where cost matters |
| Model | Type | Response time | Sensing range | Beam spacing | Protection |
|---|---|---|---|---|---|
GM1 | Type 2 | 2–15 ms | 0.1–7.0 m | 10 / 20 / 40 mm | IP65 |
GM2 | Type 4 | <28 ms | 0.1–7.0 m | ||
GM3 | Type 4 | <28 ms | 4.0–80 m |
EPDM rubber, 20–50 N actuation force, 80 mm minimum bend radius, IP55, to EN ISO 13856-2.
PVC, 2000 N maximum load, ≤25 ms response, IP67, to EN ISO 13856-1.
1600 J impact resistance to ISO 14120; standard 2 m × 1 m, fully modular, custom shapes available.
All-metal, natively fits Oxon-T3 / Guard-M1 / Monit-G1, compliant with LOTO.
OXCP / GUCP keys (304 stainless steel, adjustable bases available); OXTS-02 / GUTS-02 escape handles.
M12 5-pin / 8-pin, straight female, 2 m unshielded, fits the whole interlock range.
See the full Bytorent portfolio Full model list (123 order numbers)
Combined with industrial switches and machine safety products, these form a complete line-control package: networking + control + acquisition + personnel protection.
MX2000 / MX4000 / MX5000 / MX6000 — from small machines to mid-to-large high-end lines; IEC 61131-3 programming and edge AI.
MXIO Pro (modular, up to 64 modules), MXIO (integrated, up to 128 points on board), MXIO Nano (economy, up to 32 points).
Programming platform and control engine plus the edge computing platform (Nano / Lite / Pro) for acquisition, storage, analytics, modelling and AI inference.
IEC 61131-3 programming platform and control engine, decoupled from the hardware so process algorithms can be reused.
Edge computing platform in three tiers — Nano / Lite / Pro — covering acquisition, analysis, modelling and AI inference.
ELECTRIX electrical engineering platform with six modules; operated in China by MatriBOX.
Send your current brand and model, or your equipment list. We will provide a cross-reference, safety-level check and certification review.
